DP5011CM - Single Countersunk

  • Description
    • Light duty, single connection countersunk bolt
    • One 12mm diameter pin with one 50mm diameter doc
    • Doc has a countersunk hex head
    • Locked in place with a discreet set screw
    • For infill panels. Not suitable for guardloads. For guardloads, use our Doc & Pin DP502 line.
    • Formerly named Stella DP111-NC1 Doc & Pin
  • Description
    • Light duty, single connection countersunk bolt
    • One 12mm diameter pin with one 50mm diameter doc
    • Doc has a countersunk hex head
    • Locked in place with a discreet set screw
    • For infill panels. Not suitable for guardloads. For guardloads, use our Doc & Pin DP502 line.
    • Formerly named Stella DP111-NC1 Doc & Pin
  • Key Dimensions
    • Pin is the smaller 12mm diameter option for lighter loads
    • Doc has a countersunk face
    • Suitable for monolithic glass from 10mm and up thick (if using laminate glass, the outer liteTerm generally used in laminated or double-glazing. Refers to the glass located on the exterior of the building. must be at least 10mm thick)
    • Hole in face glass – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing)
    • Hole through support at Pin – If connecting into glass minimum 22.2mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Interior glass walls and infill panels
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:
Revised specs upload
  • Description
    • Light duty, single connection countersunk bolt
    • One 12mm diameter pin with one 50mm diameter doc
    • Doc has a countersunk hex head
    • Locked in place with a discreet set screw
    • For infill panels. Not suitable for guardloads. For guardloads, use our Doc & Pin DP502 line.
    • Formerly named Stella DP111-NC1 Doc & Pin
  • Key Dimensions
    • Pin is the smaller 12mm diameter option for lighter loads
    • Doc has a countersunk face
    • Suitable for monolithic glass from 10mm and up thick (if using laminate glass, the outer liteTerm generally used in laminated or double-glazing. Refers to the glass located on the exterior of the building. must be at least 10mm thick)
    • Hole in face glass – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure correct sizing)
    • Hole through support at Pin – If connecting into glass minimum 22.2mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Interior glass walls and infill panels
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
318
Grandparent Title: 
Doc & Pin