DP5021TM - Single Button Face

  • Description
    • Heavy duty, single connection button-face bolt
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the button face
    • Locked in place with a discreet set screw
    • Formerly named Stella DP122-NB1 Doc & Pin
  • Description
    • Heavy duty, single connection button-face bolt
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the button face
    • Locked in place with a discreet set screw
    • Formerly named Stella DP122-NB1 Doc & Pin
  • Key Dimensions
    • Pin is the 17mm diameter option for heavier loads
    • Doc has a 50mm diameter button face (to mount on exterior of glass)
    • Suitable for glass from 10mm to 20mm thick
    • Hole in face glass – minimum 16mm [5/8”] diameter hole in glass
    • Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Structural glass walls, canopies, and guardrails (largest recommended panel size up to 1.5m by 2.5m)
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:

This product was used in:

Revised specs upload
  • Description
    • Heavy duty, single connection button-face bolt
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the button face
    • Locked in place with a discreet set screw
    • Formerly named Stella DP122-NB1 Doc & Pin
  • Key Dimensions
    • Pin is the 17mm diameter option for heavier loads
    • Doc has a 50mm diameter button face (to mount on exterior of glass)
    • Suitable for glass from 10mm to 20mm thick
    • Hole in face glass – minimum 16mm [5/8”] diameter hole in glass
    • Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Structural glass walls, canopies, and guardrails (largest recommended panel size up to 1.5m by 2.5m)
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
321
Grandparent Title: 
Balustrades