DP5051TM - Single Button Face

  • Description
    • Heavy duty, adjustable single connection tapered face bolt
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the tapered face
  • Description
    • Heavy duty, adjustable single connection tapered face bolt
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the tapered face
  • Key Dimensions
    • Pin is 17mm diameter
    • Doc has a 50mm diameter tapered face (to mount on exterior of glass)
    • In/out adjustability of +/-6mm [1/4”]
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 21mm thick
    • Hole in glass at Doc – minimum 22.2mm [7/8”] diameter
    • Hole at Pin – If connecting into glass, minimum 22.2mm [7/8”] diameter. If connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Structural glass walls
    • Largest recommended panel size up to 1.5m by 2.5m
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:

This product was used in:

Revised specs upload
  • Description
    • Heavy duty, adjustable single connection tapered face bolt
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • One 17mm diameter pin with one 50mm diameter doc
    • Doc has an Allen key connection on the tapered face
  • Key Dimensions
    • Pin is 17mm diameter
    • Doc has a 50mm diameter tapered face (to mount on exterior of glass)
    • In/out adjustability of +/-6mm [1/4”]
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 21mm thick
    • Hole in glass at Doc – minimum 22.2mm [7/8”] diameter
    • Hole at Pin – If connecting into glass, minimum 22.2mm [7/8”] diameter. If connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole
  • Suggested Applications
    • Structural glass walls
    • Largest recommended panel size up to 1.5m by 2.5m
    • Single connection best used at corner and end conditions
    • Can be mounted to glass, flat steel, HSS profiles, and timber
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
318
Grandparent Title: 
Doc & Pin