NB505F - 50mm dia Flat Button Face

  • Description
    • A medium-duty non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • A variety of back nuts available
    • Secure locking set screw on machined back nut reduces vandalism
    • Contemporary Stella flat face
    • Tightened via 2 discreet holes on the flat face
    • Used where there is more space wanted between glass and mounting surface (25mm) 
    • Formerly named Stella NB4(P12) – Flat Face Glass Bolt
  • Description
    • A medium-duty non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • A variety of back nuts available
    • Secure locking set screw on machined back nut reduces vandalism
    • Contemporary Stella flat face
    • Tightened via 2 discreet holes on the flat face
    • Used where there is more space wanted between glass and mounting surface (25mm) 
    • Formerly named Stella NB4(P12) – Flat Face Glass Bolt
  • Key Dimensions
    • 50mm diameter flat face
    • M12 support bolt
    • 24mm [approx 1”] between glass and mounting surface (option for extended stand-offs if required)
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
    • Supports deadloads up to 1,3kN on walls & 9,5kN perpendicular to face of glass
  • Suggested Applications
    • Used with smaller  pieces of glass
      • Walls – Glass panels up to approximately 2.4m by 1.5m
      • Canopies – Glass panels up to approximately 2.0mby 1.0m
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)

 

 

Photo Credit:
Revised specs upload
  • Description
    • A medium-duty non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • A variety of back nuts available
    • Secure locking set screw on machined back nut reduces vandalism
    • Contemporary Stella flat face
    • Tightened via 2 discreet holes on the flat face
    • Used where there is more space wanted between glass and mounting surface (25mm) 
    • Formerly named Stella NB4(P12) – Flat Face Glass Bolt
  • Key Dimensions
    • 50mm diameter flat face
    • M12 support bolt
    • 24mm [approx 1”] between glass and mounting surface (option for extended stand-offs if required)
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
    • Supports deadloads up to 1,3kN on walls & 9,5kN perpendicular to face of glass
  • Suggested Applications
    • Used with smaller  pieces of glass
      • Walls – Glass panels up to approximately 2.4m by 1.5m
      • Canopies – Glass panels up to approximately 2.0mby 1.0m
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)

 

 

Grandparent: 
319
Grandparent Title: 
Glass Bolts