SS201FT-NB601T

  • Description
    • A heavy-duty single arm face-mounted spider fitting complete with 1 non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • This single arm spider is designed to be used with the “straight line” SS202FT spider assembly
    • Superior load bearing capabilities
    • Single fixing bolt and shear pin provide secure fastening of spider onto structure
    • Formerly named the S20-1-NB2a Spider Assembly
  • Description
    • A heavy-duty single arm face-mounted spider fitting complete with 1 non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • This single arm spider is designed to be used with the “straight line” SS202FT spider assembly
    • Superior load bearing capabilities
    • Single fixing bolt and shear pin provide secure fastening of spider onto structure
    • Formerly named the S20-1-NB2a Spider Assembly
    • A little more about the NB601T glass bolts affixed to spider:
      • A heavy-duty non-articulating glass bolt
      • Tightened via 2 discreet holes on the flat face
      • Largest non-articulating standard glass bolt (custom orders for larger glass bolts are available)     
  • Key Dimensions
    • Spider Fitting  
      • 1 arm
      • Approximately 93mm from the face of the structure to the outside face of glass when installed (distance may  change with glass thickness)
    • NB601T Non-articulating Bolt                                          
      • 60mm diameter tapered face
      • M14 support bolt
      • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Best suited for face-mounting onto steel structures, HSS profiles or concrete 
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 25mm thick  
    • Used with larger pieces of glass  
      • Structural Glass Walls – Glass panels up to 2m by 2m 
      • Canopies – Glass panels up to 2m by 2m 
  • Loading Capabilities
    • Spider is capable of withstanding 1.5kN [335lbs] in plane and 3.7kN [675lbs] perpendicular to plane  
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
    • Duplex Steel Grade 2205 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)

 

Photo Credit:

This product was used in:

Revised specs upload
  • Description
    • A heavy-duty single arm face-mounted spider fitting complete with 1 non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt
    • This single arm spider is designed to be used with the “straight line” SS202FT spider assembly
    • Superior load bearing capabilities
    • Single fixing bolt and shear pin provide secure fastening of spider onto structure
    • Formerly named the S20-1-NB2a Spider Assembly
    • A little more about the NB601T glass bolts affixed to spider:
      • A heavy-duty non-articulating glass bolt
      • Tightened via 2 discreet holes on the flat face
      • Largest non-articulating standard glass bolt (custom orders for larger glass bolts are available)     
  • Key Dimensions
    • Spider Fitting  
      • 1 arm
      • Approximately 93mm from the face of the structure to the outside face of glass when installed (distance may  change with glass thickness)
    • NB601T Non-articulating Bolt                                          
      • 60mm diameter tapered face
      • M14 support bolt
      • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Best suited for face-mounting onto steel structures, HSS profiles or concrete 
    • Suitable for monolithic and laminated glassConsists of two or more pieces of glass held together with an interlayer. In the event of a breakage, the interlayer holds the shards of glass together. Tempered laminated glass is required by most codes for overhead applications such as canopies and is recommended for situations where people could be injured by falling glass. from 10mm to 25mm thick  
    • Used with larger pieces of glass  
      • Structural Glass Walls – Glass panels up to 2m by 2m 
      • Canopies – Glass panels up to 2m by 2m 
  • Loading Capabilities
    • Spider is capable of withstanding 1.5kN [335lbs] in plane and 3.7kN [675lbs] perpendicular to plane  
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
    • Duplex Steel Grade 2205 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)

 

Grandparent: 
512
Grandparent Title: 
NB601T - 60mm dia Button Face