ST503C-N (HSS Mount)

  • Description
    • An adjustable glass bolt that mounts glass to HSS profiles
    • Simple and accurate install with Stella’s Original Nutsert fasteners
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • Countersunk flat head cap screw
    • Complete with Stella Nutsert to allow easy install onto HSS profiles
    • If the term “nutsert” is new to you…It’s a Stella Innovation - a labour/cost-saving alternative to drilling and tapping and works well for thin-walled HSS (1/4” to ½” thick). It functions like a rivet-nut and forms a collar on the inside of the HSS.
  • Description
    • An adjustable glass bolt that mounts glass to HSS profiles
    • Simple and accurate install with Stella’s Original Nutsert fasteners
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • Countersunk flat head cap screw
    • Complete with Stella Nutsert to allow easy install onto HSS profiles
    • If the term “nutsert” is new to you…It’s a Stella Innovation - a labour/cost-saving alternative to drilling and tapping and works well for thin-walled HSS (1/4” to ½” thick). It functions like a rivet-nut and forms a collar on the inside of the HSS.
  • Key Dimensions
    • 50mm diameter back plate with countersunk bolt face (flush with glass surface)
    • M12 support bolt with Nutsert (capacity 9,5kN)
    • In/out adjustability of 6mm [1/4”] – minimum 48mm [1 3/4”] to maximum 58mm [2 ¼”] between glass and mounting surface
    • Suited for a 10/10 laminate glass…but minimum glass thickness is 10mm (or 10mm on the inner liteA term generally used in laminated or double glazing. Refers to the glass located on the interior of the building.)
    • Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”]
    • See detail of recommended hole in glass for this countersunk connection in the attached pdf drawing
  • Suggested Applications
    • Guards, partitions, signage, walls and canopies
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:

Specs and Downloads

Revised specs upload
Spec upload: 
  • Description
    • An adjustable glass bolt that mounts glass to HSS profiles
    • Simple and accurate install with Stella’s Original Nutsert fasteners
    • Offers in/out adjustability – perfect for uneven mounting surfaces
    • Glass is front mounted for ease of install
    • Countersunk flat head cap screw
    • Complete with Stella Nutsert to allow easy install onto HSS profiles
    • If the term “nutsert” is new to you…It’s a Stella Innovation - a labour/cost-saving alternative to drilling and tapping and works well for thin-walled HSS (1/4” to ½” thick). It functions like a rivet-nut and forms a collar on the inside of the HSS.
  • Key Dimensions
    • 50mm diameter back plate with countersunk bolt face (flush with glass surface)
    • M12 support bolt with Nutsert (capacity 9,5kN)
    • In/out adjustability of 6mm [1/4”] – minimum 48mm [1 3/4”] to maximum 58mm [2 ¼”] between glass and mounting surface
    • Suited for a 10/10 laminate glass…but minimum glass thickness is 10mm (or 10mm on the inner liteA term generally used in laminated or double glazing. Refers to the glass located on the interior of the building.)
    • Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”]
    • See detail of recommended hole in glass for this countersunk connection in the attached pdf drawing
  • Suggested Applications
    • Guards, partitions, signage, walls and canopies
  • Materials
    • Stainless Steel Grade 304 (standard)
    • Stainless Steel Grade 316 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
320
Grandparent Title: 
Stand-offs