ST504F-C (Concrete Mount) (12.5mm spacer)

  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For tight spacing between glass and mounting surface, offers 12.5mm [1/2”] between glass and mounting surface
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For tight spacing between glass and mounting surface, offers 12.5mm [1/2”] between glass and mounting surface
  • Key Dimensions
    • 50mm diameter flat button face
    • M12 support bolt
    • 12.5mm [approx 1/2”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller pieces of glass
      • Walls – Up to approximately 2.4m by 1.5m
      • Canopies – Up to approximately 1.5m by 0.8m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:
Revised specs upload
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For tight spacing between glass and mounting surface, offers 12.5mm [1/2”] between glass and mounting surface
  • Key Dimensions
    • 50mm diameter flat button face
    • M12 support bolt
    • 12.5mm [approx 1/2”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller pieces of glass
      • Walls – Up to approximately 2.4m by 1.5m
      • Canopies – Up to approximately 1.5m by 0.8m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
320
Grandparent Title: 
Stand-offs