ST504T-W (Wood Mount) (12.5mm Spacer)

  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to wood
    • Tightened via 2 discreet holes on the button face
    • For tight spacing between glass and mounting surface, offers 9.5mm [approx. 1/2”] between glass and mounting surface
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to wood
    • Tightened via 2 discreet holes on the button face
    • For tight spacing between glass and mounting surface, offers 9.5mm [approx. 1/2”] between glass and mounting surface
  • Key Dimensions
    • 50mm [2”] diameter tapered button face
    • M12 machined lagbolt (bolt capacity 9,5kN)
    • Lagbolt offers a 3 5/8” embed into wood
    • 12.5mm [approx 1/2”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used for walls, guards, signage and canopies
    • Walls – Up to approximately 2.4m by 1.5m

      • Canopies – Up to approximately 2.0m by 1.0m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Machine finish similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:
Revised specs upload
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to wood
    • Tightened via 2 discreet holes on the button face
    • For tight spacing between glass and mounting surface, offers 9.5mm [approx. 1/2”] between glass and mounting surface
  • Key Dimensions
    • 50mm [2”] diameter tapered button face
    • M12 machined lagbolt (bolt capacity 9,5kN)
    • Lagbolt offers a 3 5/8” embed into wood
    • 12.5mm [approx 1/2”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used for walls, guards, signage and canopies
    • Walls – Up to approximately 2.4m by 1.5m

      • Canopies – Up to approximately 2.0m by 1.0m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Machine finish similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
320
Grandparent Title: 
Stand-offs