ST505F-C (Concrete Mount) (24mm Spacer)

  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For applications where more space is needed between glass and mounting surface, 24mm [1”] of space between glass and mounting surface is offered
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For applications where more space is needed between glass and mounting surface, 24mm [1”] of space between glass and mounting surface is offered
  • Key Dimensions
    • 50mm [2”] diameter flat button face
    • M12 support bolt
    • 24mm [approx 1”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller  pieces of glass
      • Walls – Up to approximately 2.4m by 1.5m
      • Canopies – Up to approximately 1.5m by 0.8m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Machine finish similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:

This product was used in:

Revised specs upload
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to concrete
    • Tightened via 2 discreet holes on the side of button face
    • For applications where more space is needed between glass and mounting surface, 24mm [1”] of space between glass and mounting surface is offered
  • Key Dimensions
    • 50mm [2”] diameter flat button face
    • M12 support bolt
    • 24mm [approx 1”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller  pieces of glass
      • Walls – Up to approximately 2.4m by 1.5m
      • Canopies – Up to approximately 1.5m by 0.8m
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Machine finish similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
320
Grandparent Title: 
Stand-offs