ST507F-W (Thin Wood Mount)

  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to thinner wood
    • Tightened via 2 discreet holes on the side of button face
    • Mounted to wood via (4) #12 Flat head wood screws (screws by others)
    • Looking for “rules of thumb” guidelines on where to place stand-offs in glass guards – please email us for a helpful pdf guide!
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to thinner wood
    • Tightened via 2 discreet holes on the side of button face
    • Mounted to wood via (4) #12 Flat head wood screws (screws by others)
    • Looking for “rules of thumb” guidelines on where to place stand-offs in glass guards – please email us for a helpful pdf guide!
  • Key Dimensions
    • 50mm [2”] diameter flat button face
    • M12 support bolt
    • 14mm [9/16”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm [3/8” to 1”] thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller pieces of glass, mostly in glass guard and decorative wall applications
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Photo Credit:
Revised specs upload
  • Description
    • A non-articulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass. glass bolt for mounting glass to thinner wood
    • Tightened via 2 discreet holes on the side of button face
    • Mounted to wood via (4) #12 Flat head wood screws (screws by others)
    • Looking for “rules of thumb” guidelines on where to place stand-offs in glass guards – please email us for a helpful pdf guide!
  • Key Dimensions
    • 50mm [2”] diameter flat button face
    • M12 support bolt
    • 14mm [9/16”] between glass and mounting surface
    • Suitable for glass up from 10mm to 25mm [3/8” to 1”] thick
    • Minimum 22mm [7/8”] diameter hole in glass
  • Suggested Applications
    • Used with smaller pieces of glass, mostly in glass guard and decorative wall applications
  • Materials
    • Stainless Steel Grade 316 (standard)
    • Stainless Steel Grade 304 (optional)
  • Finish
    • Similar to No. 4 Satin (standard)
    • Bright polish mirror similar to No. 8 (optional)
Grandparent: 
320
Grandparent Title: 
Stand-offs