Doc & Pin

Doc & Pin

How to choose between the Doc & Pins?
DP501 Series are best suited for light walls and infill panels.
DP502 Series are commonly used on structural glass walls (including glass fin walls) and canopies.
DP503 Series (Hook) offers fastest install on structural glass walls.
DP504 Series (ArticulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass.is a Stella Original Design allowing the creation of facettedA surface that appears curved, made of flat pieces of glass. glass walls or balustrades.
DP505 Series (Adjustable) is a Stella Original Design that offers quick in and out adjustability on uneven mounting surfaces. 

Use Single Doc & Pins in the Ends or Corners. Use Doubles in the Middle.
Use a single doc and pin to connect glass to the support structure at the end or corner of an application.

Use a double doc and pin to connect two pieces of glass in the middle of an application (double doc and pins are essentially two single doc and pins mounted back to back through the support structure). 

More Options – Countersunk or Button Face Bolts
Doc and Pin systems are available with a button face front (mounts on outside of glass) or a countersunk bolt (the bolt is mounted flush with the front of the glass).
Useful tip – don’t use a countersunk bolt on an overhead application like a canopy.

Alternate support to Spiders. Same applications as Spiders plus used on guardrails.

How to choose between the Doc & Pins?
DP501 Series are best suited for light walls and infill panels.
DP502 Series are commonly used on structural glass walls (including glass fin walls) and canopies.
DP503 Series (Hook) offers fastest install on structural glass walls.
DP504 Series (ArticulatingThis term refers to the ability of a glass bolt to rotate in such a way that the glass can flex under load, relieving the stresses around the holes in the glass.is a Stella Original Design allowing the creation of facettedA surface that appears curved, made of flat pieces of glass. glass walls or balustrades.
DP505 Series (Adjustable) is a Stella Original Design that offers quick in and out adjustability on uneven mounting surfaces. 

Use Single Doc & Pins in the Ends or Corners. Use Doubles in the Middle.
Use a single doc and pin to connect glass to the support structure at the end or corner of an application.

Use a double doc and pin to connect two pieces of glass in the middle of an application (double doc and pins are essentially two single doc and pins mounted back to back through the support structure). 

More Options – Countersunk or Button Face Bolts
Doc and Pin systems are available with a button face front (mounts on outside of glass) or a countersunk bolt (the bolt is mounted flush with the front of the glass).
Useful tip – don’t use a countersunk bolt on an overhead application like a canopy.