Full Fin Support Structure

Fin support systems are considered the workhorse of structural glass walls!

Full Fin Support

This system offers a very high degree of transparency, especially if low iron glass is used for the fins.

Glass Fins can be suspended from above or rested on the structure below. Typical max height is up to 10m [33 ft] although longer spans can be achieved.

Spider or Doc & Pin fittings are usually bolted at the side of the fins and stainless steel shoes and connector plates keep fins in place.

Splice plates allow fins to be segmented into reasonable lengths for fabrication and install. Spider fittings often combined with splice plates for a cleaner look.