Technical Data

Key Dimensions

• 38mm [1 1/2”] diameter tapered button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 38mm [1 1/2”] diameter tapered button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 38mm [1 1/2”] diameter flat button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 38mm [1 1/2”] diameter flat button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 38mm [1 1/2”] diameter flat button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 38mm [1 1/2”] diameter flat button face.
• M8 support bolt.
• 8mm [5/16”] between glass and mounting surface.
• Suitable for glass up from 6mm to 19mm [1/4” to 3/4”] thick.
• Minimum 19.1mm [3/4”] diameter hole in glass.

Suggested Applications

• Ideally used on decorative applications with little load.
• Depending on site conditions, this bolt may be used on guards – please review with us for more details.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter tapered button face.
• M12 support bolt.
• 12.5mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”].
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter tapered button face.
• M12 support bolt.
• 11.6mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter tapered button face.
• M12 machined lagbolt (bolt capacity 9,5kN).
• Lagbolt offers a 3 5/8” embed into wood.
• 11.6mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used for walls, guards, signage and canopies.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 2.0m by 1.0m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter tapered button face.
• M12 support bolt.
• 23.8mm [approx 1”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”].
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter tapered button face.
• M12 machined lag bolt with a capacity of 9,5kN.
• Lagbolt offers a 3 5/8” embed into wood.
• 23.8mm [approx. 1”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter flat button face.
• M12 support bolt.
• 11.6mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”].
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter flat button face.
• M12 support bolt.
• 11.6mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter flat button face.
• M12 machined lagbolt (bolt capacity 9,5kN).
• Lagbolt offers a 3 5/8” embed into wood.
• 11.6mm [approx 1/2”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used for walls, guards, signage and canopies.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 2.0m by 1.0m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter flat button face.
• M12 support bolt.
• 23.8mm [approx 1”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Stella nutsert is suitable for steel thicknesses from 5.3mm to 12.7mm [1/4” to 1/2”].
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm [2”] diameter tapered button face.
• M12 support bolt.
• 23.8mm [approx 1”] between glass and mounting surface.
• Suitable for glass up from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Up to approximately 2.4m by 1.5m.
• Canopies – Up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.