Technical Data

Key Dimensions

• 50mm diameter tapered face.
• M8 support bolt (up to 60mm long).
• 12mm spacing between glass and mounting surface.
• Suitable for monolithic and laminated glass from 10mm to 19mm thick.
• Minimum 15.9mm [5/8”] diameter hole in glass.
• A variety of back nuts available.
• Secure locking set screw on machined back nut reduces vandalism.
• Supports deadloads up to 1.0kN on walls.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter tapered face.
• M12 support bolt with a M8 Cap screw in front.
• 20mm spacing between glass and mounting surface.
• Suitable for monolithic and laminated glass from 12mm to 21.5mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.
• Supports deadloads up to 1.0kN on walls.
• Allen key connection on the tapered face.
• Secure locking set screw on machined back nut reduces vandalism.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• 50mm diameter tapered face.
• M12 support bolt.
• 12.5mm [approx 1/2”] between glass and mounting surface.
• Suitable for monolithic and laminated glass from 10mm to 25mm thick.
• Minimum 22mm [7/8”] diameter hole in glass.
• Supports deadloads up to 1,3kN on walls.
• A variety of back nuts available.
• Tightened via 2 discreet holes on the tapered face.
• Secure locking set screw on machined back nut reduces vandalism.

Suggested Applications

• Used with smaller pieces of glass.
• Walls – Glass panels up to approximately 2.4m by 1.5m.
• Canopies – Glass panels up to approximately 1.5m by 0.8m.

Materials

• Stainless Steel Grade 304 (standard).
• Stainless Steel Grade 316 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.