Technical Data

Key Dimensions

• Pin is the 17mm diameter option for heavier loads.
• Doc has a 50mm diameter button face (to mount on exterior of glass).
• Suitable for glass from 10mm to 20mm thick.
• Hole in face glass – minimum 16mm [5/8”] diameter hole in glass.
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls, canopies, and guardrails (largest recommended panel size up to 1.5m by 2.5m).
• Single connection best used at corner and end conditions.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pins are the 17mm diameter option for heavier loads.
• Docs have a 50mm diameter button face (to mount on exterior of glass).
• Suitable for glass from 10mm to 20mm thick.
• Hole in face glass – minimum 16mm [5/8”] diameter hole in glass.
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls, canopies, and guardrails (largest recommended glass panel size up to 1.5m by 2.5m).
• Double (or back-to-back) connection is best suited for applications with glass panels on both sides on mounting post.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pin is the 17mm diameter option for heavier loads.
• Doc has a 50mm diameter countersunk face (to mount flush with the glass for a smooth finish).
• Suitable for monolithic glass from 10mm + thickness (if using laminate glass, the outer lite must be at least 10mm thick).
• Hole in face glass – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure sizing).
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls (largest recommended glass panel size up to 1.5m by 2.5m).
• Single connection best used at corner and end conditions.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pins is the 17mm diameter option for heavier loads.
• Docs have a 50mm diameter countersunk face (to mount flush with the glass for a smooth finish).
• Suitable for monolithic glass from 10mm + thickness (if using laminate glass, the outer lite must be at least 10mm thick).
• Hole in face glass – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure sizing).
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls (largest recommended glass panel size up to 1.5m by 2.5m).
• Double (or back-to-back) connection is best suited for applications with glass panels on both sides on mounting post.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pin is 17mm diameter.
• Doc has a 50mm diameter tapered face (to mount on exterior of glass).
• Suitable for monolithic and laminated glass from 10mm to 20mm thick.
• Hole in face glass – minimum 16mm [5/8”] diameter hole in glass.
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls.
• Largest recommended glass panel size up to 1.5m by 2.5m.
• Single connection best used at corner and end conditions.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pins are 17mm diameter to carry heavier loads.
• Docs have a 50mm diameter tapered face (to mount on exterior of glass).
• Suitable for monolithic and laminated glass from 10mm to 20mm thick.
• Hole in face glass – minimum 16mm [5/8”] diameter hole in glass.
• Hole through structure at Pin – If connecting into glass minimum 22.2mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls.
• Largest recommended glass panel size up to 1.5m by 2.5m.
• Double (or back-to-back) connection is best suited for applications with glass panels on both sides on mounting post.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pin is 17mm diameter to carry heavier loads.
• Docs has a 50mm diameter back plate with countersunk bolt face (flush with glass surface).
• Suitable for monolithic glass from 10mm + thickness (if using laminate glass, the outer lite must be at least 10mm thick).
• Hole in glass at Doc – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure sizing).
• Hole at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls.
• Largest recommended glass panel size up to 1.5m by 2.5m.
• Single connection best used at corner and end conditions.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror(upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.

Key Dimensions

• Pins are 17mm diameter to carry heavier loads.
• Docs have a 50mm diameter back plate with countersunk bolt face (flush with glass surface).
• Suitable for monolithic glass from 10mm + thickness (if using laminate glass, the outer lite must be at least 10mm thick).
• Hole in face glass – 19mm [3/4”] diameter countersunk hole in glass (upon order we can supply a sample bushing for you to forward to your glass fabricator to ensure sizing).
• Hole through structure at Pin – If connecting into glass minimum 22mm [7/8”] diameter hole in glass/if connecting into steel or another substructure minimum 12.7mm [1/2”] diameter hole.

Suggested Applications

• Structural glass walls.
• Largest recommended glass panel size up to 1.5m by 2.5m.
• Double (or back-to-back) connection is best suited for applications with glass panels on both sides on mounting post.
• Can be mounted to glass, flat steel, HSS profiles, and timber.

Materials

• Stainless Steel Grade 316 (standard).
• Stainless Steel Grade 304 (upon request).

Finishes

• Satin (standard).
• Bright polish mirror (upon request).

SPECTRUM SERIES (Hard Ceramic Coating for Stainless Steel Hardware) – Upon Request.

Colours Options: Black, Gold, Silver/Grey, Rose Gold & Dark Bronze.

Available Textures: Matte, Brushed, Mirror.